基于土地利用/覆盖的甘肃省景观生态风险时空变化特征

甘肃省景观类型丰富多样,在中国西部地区的生态安全中起关键性作用,也为当地发展提供着重要的物质基础和生态服务。由于气候变化和人类不合理活动的影响,甘肃省部分地区生态环境的安全与稳定遭到严峻挑战。本研究基于欧洲航空局全球土地利用/覆盖数据（CCI-LC）,利用动态度、转移矩阵方法分析了2005-2019年甘肃省土地利用/覆盖变化特征;通过构建景观生态风险指数并运用空间自相关分析法分析了景观生态风险的空间分布特征。结果显示：1)2005-2019年间,裸地面积减少最多,变化率1.88%,耕地次之,变化率2.31%;草地面积增加最多,变化率1.83%,建设用地次之,变化率191.08%。2）所有土地利用/覆盖类型中,建设用地的动态度最高且在整个研究时期内变化速率都保持在较高水平,综合动态度最大的时期为2010-2019年。3）土地利用/覆盖转移矩阵主要表现为耕地、林地、草地、裸地之间的转入与转出以及其他土地类型向建设用地的转入。4)2019年整体的生态风险值较2005年明显上升。其中低风险区和较低风险区面积最多,转化最频繁;中等风险区、较高风险区和高风险区面积虽然较少,但都存在不同程度的增长。...     

膜孔灌溉田面综合糙率系数的确定

根据膜孔灌溉田面水流运动特性 ,建立了膜孔灌溉田面水流运动零惯性量数学模型 ,并将其与优化理论相结合 ,提出了确定膜孔灌溉田面综合糙率系数的优化模型。实例计算与方法验证表明 ,该方法能够简单而有效地确定膜孔灌溉田面综合糙率系数。该研究成果为膜孔灌溉理论与技术的进一步研究奠定了基础     

Hydrolysis and Condensation of Silane Agent for Metallic Surface Treatment

Novel surface treatment technique by silane film is developing for metallic anti corrosion and coat improvement. The key points, hydrolysis and condensation, for the stability of the Silane agent(SA) solution is investigated, and the effective factors of stability for silane agent solution and the relative rule are discussed. It is found that stability of SA solution is related to the temperature, pH, solvents, SA concentration and additive by studying the state of the solution and the conductivity-time curve of SA solution. Meanwhile, controlling factors and improving methods for SA stability are proposed to guide the practical application of metallic surface anti-corrosion treatment by SA.     

Calculating the Hollowing-center Grounding Device Resistance Based on the Surface Charge Simulation Method

An equivalent model for hollowing-center grounding device is proposed, the hollowing-center grounding device resistance is calculated with the surface charge simulation method and the computer programme is programmed based on this model. The accuracy of the model and method is validated by experimentation.     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

On the Analysis of EMCS and Its Application in the Project of Shenzhen Underground

In this paper, the selection of type, function and technological requirements of EMCS for Shenzhen Underground has been introduced.Based on the investigation for EMCS's worldwide applications and the analysis of practice in Shenzhen Underground, the comparison and selection of PLC and DDC have been done completely.At the same time,the introduction of EMCS is organized by the center level, station level and the spot level.     

Penetration behavior of bath induced by top-blown gas jets for steelmaking converter

The cavity induced by top-blow gas jets impinging on the bath surface is one of most important parameters, which has overwhelming influence on the rate of slag formation and metallurgical performance. Water model experiments are conducted through a 1/10 scaled-down top-blown convertor. Effects of lance height and gas flow rate on penetration behavior are studied, and also the influence mechanism of liquid surface tension on penetration depth is addressed based on the experiments and theory analysis. An energy utilization index (EUI) is defined to reflect how much the impinging kinetic energy of gas jets are transferred into bath for formation of cavity, and an improved model is proposed to predict penetration depth of jets. The results show that penetration depth increases with lowering lance height and increasing gas flow rate, and impact diameter increases with increasing lance height, but is little affected by gas flow rate. Influence of liquid surface tension on penetration depth is enhanced with increasing surface tension and penetration depth. The EUI increases with increasing lance height, and a function relationship of it with lance height is obtained based on the experiments.     

Feasibility for Building the Under-ground Sewage Treatment Plant in Chongqing City

With the development of the economy, the demand forhabitation is enhanced and the sewage and industrial waster water must be disposed before outlet. Today, most of the sewage treatment plants are built on the aboveground without discussing the underground. Therefore, by the comparative analysis of the property and cost of the underground sewage treatment plant and the ground, the underground sewage treatment plant have merits in save the city land and improvement environment.The Chongqing citypossess a lot of advantages in using the space of underground with the analysis of the physiognomy and geology condition of the Chongqing city. Therefore, the development of underground sewage treatment plant is feasible in the Chongqing city.